![background image](http://html.mh-extra.com/html/raven/smartrax/smartrax_calibration-and-operation-manual_788872083.webp)
5
P/N 016-0171-277 Rev. L
77
VIPER PRO CALIBRATION AND OPERATION
SYSTEM DISENGAGE CALIBRATION
SMARTRAX SYSTEMS WITH A PRESSURE TRANSDUCER INSTALLED
IMPORTANT:
This section applies only to SmarTrax systems utilizing a pressure transducer to disengage the SmarTrax
system when the steering wheel is turned. If a flow or pressure switch is installed in the SmarTrax system,
refer to the SmarTrax Systems with a Flow Switch or Pressure Switch Installed section on page 78 to
calibrate the SmarTrax system.
1. Select
Next
in the SmarTrax Setup Wizard. The following screen will appear:
FIGURE 7. Transducer Calibration Screen
2. Select
Start
. The following screen will appear:
FIGURE 8. Transducer Calibrating Screen
Summary of Contents for SmarTrax
