![background image](http://html.mh-extra.com/html/raven/smartrax/smartrax_calibration-and-operation-manual_788872049.webp)
4
P/N 016-0171-277 Rev. L
43
VIPER 4/4+ CALIBRATION AND OPERATION
2. Select
Serial Devices
.
.
3. Verify that the SmarTrax and SmarTrax GPS are listed in the Serial Device Setup screen.
NOTE:
If SmarTrax and SmarTrax GPS are not listed, press the Retry icon
on the bottom-right corner of
the screen. If these devices still do not appear, inspect cable connections to ensure they are installed
securely, then press the Retry icon again. If the devices still do not appear, refer to Chapter 7,
Troubleshooting for further information.
4. Press
Accept
.
5. Select
GPS Setup
.
6. Verify that SmarTrax on DGPS is visible and selected.
NOTE:
If SmarTrax GPS on DGPS is not visible and selected in the list, refer to Chapter 7, Troubleshooting
beginning on page 133 for further information.
Edit
GPS Setup
Summary of Contents for SmarTrax
