Raven Cruizer II, Operation Manual

Page: 16 / 40

1 4
5. Select the desired marker location which the Cruizer II will use to record
the boundary. The marker location may be set to the left, right or center of
the configured guidance width.
Note: Select the Pause when not Applying option to allow the Cruizer II to
automatically pause boundary recording if the coverage History is
toggled off.
6. Touch Boundary Mapping Menu Record or Record
Zone .
7. Begin driving along the desired zone or field boundary. Cruizer II will record
the boundary path according to the selected marker location.
Note: Cruizer II will display the recorded path of a field boundary with a blue
line. Zones will display with a yellow line.
8. While recording, touch Boundary Mapping Menu to access the
following field boundary or zone tools:
Field Area Display
After completing a field boundary, the Cruizer II
displays the calculated total field area in either the
lower panel of the Field Review Screen or by
opening the
Boundary Mapping Menu .
Field Zone Description
Pause - While recording a feature, touch the Pause icon to
pause recording of the boundary or zone. This feature is
useful when refilling tanks or when the vehicle path is not part
of the boundary.
When paused, select Record or Record Zone to
resume recording the zone or boundary.
Stop - Touch the Stop icon to complete the boundary or zone.
Cruizer II will close the zone or boundary feature by
connecting the start point and the current vehicle location with
a straight line.
Note: The Cruizer II automatically completes the boundary or
zone feature if the vehicle returns to within one boom
width of the starting point.
Reset - Select the Reset icon to clear the current boundary or
zone.
Delete - Touch the Delete icon from the Boundary Mapping
Menu to select and delete a completed zone feature.