manualshive.com logo in svg

Raven Cruizer II, Operation Manual

Share
Download
Raven Cruizer II Operation Manual Download Page 4

2

Overview

The Cruizer II™ guidance system offers advanced guidance with an easy-to-
use touch screen. In addition, the Cruizer II simulates radar for speed-
compensated applications and supplies Differential GPS data to other 
controllers or optional systems. The Cruizer II may be used with:

• Raven SmarTrax™ or SmartSteer™ automated steering control systems.

• Raven TM-1™ Tilt Module for tilt-corrected guidance.

• Raven automatic section control products such as AccuBoom™, 

SmartBoom™, AccuRow™ and SmartRow™.

• Raven SmartYield™ yield monitoring system.

• Raven SCS 400/600 Series consoles (e.g. SCS 440/450 or SCS 660/660).

FIGURE 1. Back Panel of Cruizer II Console

This manual is designed for use with Cruizer II™ software version 3.0. 
Updates for Raven manuals are available at the Applied Technology Division 
web site:

www.ravenhelp.com

Sign up for e-mail alerts to receive notification when updates for Raven 
products are available on the Raven web site.

Warning:  Cruizer II consoles with P/N 063-0173-090 or

063-0173-327 are NOT weather resistant.

Note:  Be sure to delete existing or previous jobs from internal memory 

before updating the Cruizer software.

Jobs started with previous software versions will not be 
compatible with version 3.0. It will not be possible to resume these 
jobs after applying the software update and there may be issues 
deleting jobs from internal memory.

Port
B and D

RAM Mount

Port

A and C

Power Port

CAN Port

USB Ports

Power 
Button

Antenna Port

Summary of Contents for Cruizer II









































Reviews:

No comments

Brands by name

Popular brands

Load more brands