Rauch 2.1, Operator'S Manual

Page: 10 / 121

User instructions 2
4
2.3 Notes on text descriptions
2.3.1 Instructions and procedures
Steps that the operator must carry out are shown as a numbered list.
1. Instruction for action step 1
2. Instruction for action step 2
Instructions involving only one step are not numbered. The same applies for ac-
tion steps that do not have a specific sequence.
A bullet is placed in front on these instructions:

Handling instruction
2.3.2 Listings
Listings without a specific sequence are shown with bullet points (level 1) and
dashes (level 2):

Property A
-
Point A
- Point B

Property B
2.3.3 Cross-references
References to other sections in the manual are shown with paragraph number,
heading text, and page number:

Also refer to Chapter 3, "Safety", from page 5 onwards.
References to other documents are made without mentioning the exact chapter
or page number:

Please also observe the instructions contained in the manual for the universal
drive shaft.