Raritan SX32 Installation And Operation Manual Download Page 97

Page: 97 / 178

HAPTER

SNMP

Chapter 8: SNMP

SNMP Trap Configuration

The Raritan Enterprise MIB can be accessed via the FAQ Support section on Raritan’s Web site,
www.raritan.com.

Name

snmp

enable|disable

> [COMM_NAME]|<add|del> RECIPIENT>]

Description

Configure the SNMP feature.

snmp

With no parameters, the current SNMP configuration is displayed.

snmp

enable|disable

> [COMM_NAME]

Depending on the parameter, enable or disable SNMP traps. Specify the community name used to

send traps using the optional COMM_NAME parameter.

snmp

add|del

> RECIPIENT

Add or delete trap recipients. A recipient is an IP address with an optional space- separated port

number. If a recipient with a port number is to be removed, include the port number in the

delete

command.

Traps may be sent to multiple ports with the same IP address.

NOTE:

At this time, the Dominion SX system must be rebooted for configuration changes (other than

disabling SNMP) to take effect.

Example:( in this example, the username is TANAKA)

TANAKA:Command>

snmp

Enabled: N

Community: public

Trap Destinations:

10.0.0.125

6.6.6.6

TANAKA:Command>

snmp add 10.0.0.56 78

Any SNMP configuration changes require rebooting to take effect.

TANAKA:Command>

snmp

Enabled: N

Community: public

Trap Destinations:

10.0.0.125

6.6.6.6

10.0.0.56:78

TANAKA:Command>

snmp del 10.0.0.56

Any SNMP configuration changes require rebooting to take effect.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 97 / 178

Search results

Summary of Contents for SX32

Reviews: