manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 173 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 173

A

PPENDIX 

I:

 

T

ROUBLESHOOTING

 

163 

 

Port Access  

P

ROBLEM

 

S

OLUTION

 

Port Access Refresh 

The unit does not automatically refresh the Port Access List. It is refreshed 
only when the user clicks on the [

Port Access

]

 

button, therefore, it is 

possible that a user will have permissions revoked and these changes will 
not be visible on the port access screen until the [

Port Access

] button is 

activated. 

A window will appear indicating that permission is no longer allowed to 
this port. 

Whenever possible, it is recommended that Administrators not change port 
access rights to a user who is already logged in to the unit. 

 

 

Upgrade  

P

ROBLEM

 

S

OLUTION

 

FTP - Server Unreachable 

Should the FTP server specified in the upgrade panel be unreachable or 
incorrect, the upgrade process will halt until a response is received from 
the FTP server or until a timeout occurs. 

Please wait and allow the FTP Server Unreachable message to appear. 

 

FTP - File Not Found 

The  unit  requires  a  package of upgrade files to be in the directory 
specified by the upgrade path. This package must have all included files 
and an 

upgrade.cnf

 file. Should this file not exist, or if the contents of the 

file are not in the indicated places, the File Not Found message will 
appear. 

Verify that the upgrade package is in the correct directory and confirm the 
upgrade path and IP address of the FTP server. 

If the upgrade still fails, reinstall the upgrade package and begin again. 

 

 
Modem 

P

ROBLEM

 

S

OLUTION

 

Login Failure 

The unit supports Web-browser access through the modem at connection 
speeds of 28.8K bps or greater. Should the baud rate be insufficient, the 
user will be unable to log on to the unit via the modem. 

28.8K bps minimum connection speed is recommended for browser-based 
modem authentications (login). For CLI-based access, using SSH or 
Telnet, speed as low as 9600bps is adequate. 

 

Summary of Contents for SX32



















































































































































































Reviews:

No comments