manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 131 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 131

A

PPENDIX 

E:

 

C

ONFIGURING 

C

ISCO 

ACS

 

RADIUS

 

S

ERVER

 121 

 

 

Appendix E: Configuring Cisco ACS RADIUS 

Server 

Use the following procedure to configure the Cisco RADIUS server so that you can work with Dominion 
SX. It is assumed here that Administrators are familiar with setting up and configuring the RADIUS server. 
In order for Dominion SX to support RADIUS, both the unit and the user information must be added into 
the RADIUS configuration.  

Only Version 3.0 has been validated; however, other versions of the RADIUS server should operate with 
the unit. Only the user’s role can be controlled on the unit using the RADIUS (IETF) option.  

Note: Access restrictions to specific ports on the unit cannot be controlled.  

1.

 

Log on to Cisco ACS Server using the browser. 

 

Figure 91  Cisco ACS Main Display 

2.

 

Click on the [

Network Configuration

] button in the left panel of the screen and select 

Add Entry

 to 

add/edit AAA Client. This must be done for each unit that is going to accessed via RADIUS. Click on 
the 

Authenticate

 

Using

 drop-down menu and select 

RADIUS (IETF) 

from this list. Click on the 

[

Submit

] button. 

 

 Figure 92 Unit Configuration Display 

Summary of Contents for SX32



















































































































































































Reviews:

No comments