Raritan SX32 Installation And Operation Manual Download Page 72

Page: 72 / 178

62 D

OMINION

NSTALLATION AND

PERATIONS

ANUAL

Dominion SX Standard Notification Events

The following is a list of standard events with their descriptions.

EVENT

NAME

DESCRIPTION

event.amp

event.amp.notice

event.amp.notice.boot Unit

has successfully booted.

event.amp.notice.reboot

Unit has been requested to be re-booted.

event.amp.notice.upgrade Unit has been upgraded

event.amp.notice.backup Unit has been backed up.

event.amp.notice.config

event.amp.notice.restore

Unit has been restored.

event.amp.notice.config.info

General configuration has been modified.

event.amp.notice.config.user Access

Control List has been modified.

event.amp.notice.config.version

Firmware Version number has been modified.

event.amp.notice.config.system Port name has been modified.

event.amp.notice.config.network

Network configuration has been modified.

event.amp.notice.config.datacom Datacom

configuration has been modified.

event.amp.notice.config.users

User configuration has been modified.

event.amp.notice.config.ipacl IP

address-based access control list has been

modified.

event.amp.notice.config.notif

Notification configuration has been modified.

event.amp.notice.directaccesslockout Enable Disable local access via CommandCenter

event.amp.notice.port.connection Target

connected to the port has changed state –

changed from Offline to Online, or vice-versa.

event.amp.notice.user.logoff

Forces user to log off from unit.

Dominion SX Standard Error Notification Events

The following is a list of standard error events that are internally generated by the unit. Should these
notifications occur, please call Raritan Support.

ERROR

EVENT

NAME

DESCRIPTION

event.amp.error System

related.

event.amp.error.taskInit System

related.

event.amp.error.httpExit System

related.

event.amp.error.outOfMemeory System

related.

event.amp.error.loggingTaskAlreadyDefined System

related.

event.amp.error.ftpReadFailed

System related.

event.amp.error.messagePipeFailed System

related.

event.amp.error.InternalError System

related.

event.amp.error.flashUpgradeFailed Upgrade failed to write to flash memory.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 72 / 178

Search results

Summary of Contents for SX32

Reviews: