Raritan SX32, Installation And Operation Manual, Page: 15 / 178

C
HAPTER
2: I
NSTALLATION
5
Example:
route add 192.168.0.192 15.128.122.12 -interface
8. On the command line interface, type: ping 192.168.0.192.
a. If this command successfully produces a reply from the Dominion SX unit, please proceed to step
9.
b. If this does not produce a reply, verify that the default IP address is entered correctly and there is a
route to that IP address.
9. Use the installation computer to connect to the unit, typing the factory default IP address
192.168.0.192 in the installation computer Web browser’s address line. Once you have reached the
unit’s initial configuration screen, proceed to the Initial Software Configuration section that follows.
Initial Software Configuration
Figure 4 Hardware Setup for Initial Software Configuration
User Information:
This information should be entered for each user, up to 50 user accounts, with at least one administrator for
each Dominion SX unit:
•
User Name : 32 characters maximum, one character minimum, spaces permitted.
•
Login Name : 255 characters maximum, one character minimum, no spaces.
•
User Type :
−
Administrator: Can modify configuration of the unit, has read/write access to the console window.
−
Operator: Cannot modify configuration of the unit (except own password), has read/write access
to the console window.
−
Observer: Cannot modify configuration of the unit (except own password), has read-only access to
the console window.
•
Information : Any additional information (text) you want associated with this user. Can be 64
characters maximum, no minimum, spaces permitted.
•
Password : Alphanumeric text, 6–16 characters in length, no spaces. The first six characters of the
password must contain at least two alpha and one numeric character; the first four characters cannot be
the same as the user name. Brackets ( < > ) and quotations ( “ ” ) are not allowed.
Dominion SX Unit
Installation
Computer
Browser
Crossover
Network
Cable