Raritan SX32 Installation And Operation Manual Download Page 74

Page: 74 / 178

64 D

OMINION

NSTALLATION AND

PERATIONS

ANUAL

To Upgrade the Application:

Dominion SX has the ability to run different applications on each port; Raritan has a library of applications
available for purchase, please contact us for more information.

To load these applications into the unit for deployment:

Click on the [

Upgrade

] button in the left panel.

Enter the

IP Address

where the software application package is located.

Specify the

Path

to the software package, for example

, /pub/Dominion/AmpApp

Enter the

Username

and

Password

if required.

Click on the [

Upgrade

] button.

The unit will access the FTP server and download and install the files into the unit.

Repeat the above steps for each custom application that has to be installed into the unit.

After all applications have been installed, click on the [

Reset

] button.

When the unit reboots, log on and go to the

Ports

tab. Select the appropriate ports and configure them

to use the correct application.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 74 / 178

Search results

Summary of Contents for SX32

Reviews: