Raritan SX32 Installation And Operation Manual Download Page 44

Page: 44 / 178

34 D

OMINION

NSTALLATION AND

PERATIONS

ANUAL

Note: When you make changes to Network settings on this screen, a warning message alerts you that the
system will automatically reboot when you save your changes. Changing Modem settings does not require
a system reboot.

A success message appears.

The

Report

screen is updated and displayed after a successful Save.

To Reload Configuration Changes:

Click on the [

Configuration

] button in the left panel.

Click on the tab(s) for the screens in which you want to make configuration changes.

When the status bar displays the

Configuration locked

message, other users cannot modify the unit’s

configuration.

Modify data in the screen, and click on the [

Update

] button.

The status bar will display the message:

Configuration changes not saved

Click on the [

Reload

] button to erase any changes in this and any other configuration screen.

A successful reload message appears, indicating a successful reload of the original settings and
configuration values.

The

Report

screen shows that no data has been changed.

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 44 / 178

Search results

Summary of Contents for SX32

Reviews: