manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 75 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 75

C

HAPTER 

4:

 

C

ONSOLE 

F

EATURES

 

65  

 

Reset 

Soft Reset 

Only an Administrator can execute a Soft Reset by clicking on the [

Reset

] button in the left panel of the 

main window. This resets the unit, logs off all the logged-in users and exits the application. A list of 
logged-in users who will be logged out upon reset will be displayed. The soft reset is useful when an 
Administrator wishes to disconnect all users from the unit. 

 

 

 

Figure 68 Confirmation for Reset 

 

 

Figure 69 Confirmation on Users to be Disconnected 

To Perform a Soft Reset: 

1.

 

Click on the [

Reset

] button on the left panel. 

2.

 

A list of logged-in users, if there are any, is displayed. Click on the [

OK

] button to continue.  

3.

 

The unit resets and reboots. 

4.

 

Reconnect to the unit. 

 

Summary of Contents for SX32



















































































































































































Reviews:

No comments