manualshive.com logo in svg

Raritan SX32, Installation And Operation Manual, Page: 31 / 178

Share
Download
Raritan SX32 Installation And Operation Manual Download Page 31

C

HAPTER 

4:

 

C

ONSOLE 

F

EATURES

 

21  

 

Edit 

Use the 

Copy, Paste

, and 

Select All Text 

commands to relocate and / or re-use important text. 

 

 

Figure 24 Edit Commands - Copy, Paste, and Select All Text 

To Copy and Paste All Text: 

1.

 

Click on 

Edit

 in the main menu. 

2.

 

Select 

Select All Text 

from the drop-down menu. 

3.

 

Click on 

Edit 

in the main menu. 

4.

 

Select 

Copy

 from the drop-down menu.  

5.

 

Position the cursor at the location you wish to paste the text and click once to make that location active. 

6.

 

Click on 

Edit

 in the main menu. 

7.

 

Select 

Paste

 from the drop-down menu. 

Note: There are keyboard shortcuts that you can use to highlight, copy, and paste all or partial lines of 
text:  
- Click and drag your mouse over the text you wish to copy 

 

- Press <CTRL> and tap the <C> key to copy 

 

- Position the cursor where you wish to paste the text and click in that location to make it active 
- Press <CTRL> and tap the <V> key to paste 

Note: The text copy limit in RaritanConsole is 999 lines. To increase this amount to 5000 lines, download 
the RaritanConsole upgrade from Raritan’s website:   
http://www.raritan.com/support/sup_upgrades.aspx. 

 

 

 

  

Summary of Contents for SX32



















































































































































































Reviews:

No comments