Raritan SX32 Installation And Operation Manual Download Page 157

Page: 157 / 178

PPENDIX

TCL

ROGRAMMING

UIDE

147

Possible error condition:

% ampsetconfiguration network portaddress 2398

TCL cannot write to the configuration: locked by John Smith

This denotes that there is a user that is viewing/modifying the configuration of the unit and the command
cannot modify the configuration parameters.

ampgetuser

Returns a string listing all the currently configured users and their user account parameters.

Usage: ampgetuser

% ampgetuser

Users: Steve Gaumer John Smith Michael White Fredrick Jones

Note: The names are not shown with any delimiters.

If a specific user is specified, only that user’s account information is listed. If the user name contains spaces,
the name needs to be entered in quotes.

Usage: ampgetuser <user_name>

% ampgetuser "Steve Gaumer"

userid:5

loginname:wgaumer

capability:observer

username:Steve Gaumer

userinfo:Network Engineer in Training

Ports:1:2:3:4:5:6:7:8

Summary of Contents for SX32



















































































































































































Search results

Summary of Contents for SX32

Reviews:

Raritan SX32, Installation And Operation Manual, Page: 157 / 178

Search results

Summary of Contents for SX32

Reviews: