![background image](http://html2.mh-extra.com/html/rands/rta4000/rta4000_user-manual_3161987066.webp)
Waveform setup
R&S
®
RTA4000
66
User Manual 1335.7898.02 ─ 08
Figure 5-4: Probe settings of R&S
RT-ZD20 with ProbeMeter measurement
Offset
Same as "Offset" in the "Vertical" menu, see
Copy to offset
Same as "Copy to offset" for active broadband single-ended probes, see
on page 64. The offset value is also shown in the "Channel
<n>" menu.
ProbeMeter
®
Same as "ProbeMeter
®
" for active broadband single-ended probes, see
MicroButton
Same as for active single-ended probes, see
Info
Same as for active single-ended probes, see
Attenuator RT-ZA15
If you use the external attenuator R&S
RT-ZA15 together with one of the differential
active probes R&S
RT-ZD10, R&S
RT-ZD20 or R&S
RT-ZD30, enable "Attenuator RT-
ZA15" to include the external attenuation in the measurements.
Remote command:
5.4.3.3
Current probes
Rohde
&
Schwarz provides current probes with different output connectors: BNC or
Rohde
&
Schwarz probe box.
Probes