Remote Commands
R&S
®
FSMR3000
467
User Manual 1179.0116.02 ─ 02
[SENSe:]POWer:AC:AVERage:COUNt
<Value>
Defines the number of measurements that are started as "single measurements" and
used to form an average. The value "0" causes a sliding average to be generated over
ten measurements.
Parameters:
<Value>
<numeric value>
Example:
SENS:POW:AC:AVER:COUN 30
Manual operation:
See
[SENSe:]POWer:AC:AVERage:DATA
{<Level>, <Count>}...
Queries and fills the averaging data table.
Parameters:
<Level>
irrelevant
<Count>
Example:
SENS:POW:AC:AVER:DATA 1,2,3,4,5,6
Manual operation:
See
[SENSe:]CORRection:COLLect[:ACQuire]
<MeasType>
Carries out the various steps of absolute level calibration in the Tuned RF Level mode.
Setting parameters:
<MeasType>
INPut | PMETer | PSPLitter | THRough | OPEN
INPut
Measures the comparison value at the receiver's RF input and
corrects it to the reference level
PMETer
Measures the reference level with a power meter
PSPLitter
Measures the reference level and then the comparison value.
For this measurement, the power meter and the receiver's RF
input must be connected to the DUT via a power splitter
THRough
Calibration with direct connection between tracking generator
and device input.
OPEN
Calibration with open input
Example:
CORR:COLL PSPL;*WAI
Usage:
Setting only
Configuring the Measurement
