R&S FSMR3000, User Manual

Page: 171 / 733

Common Measurement Settings
R&S
®
FSMR3000
171 User Manual 1179.0116.02 ─ 02
Remote command:
[SENSe:]POWer:AC:REFerence:STATe
on page 465
UNIT<n>:POWer:RATio
on page 465
[SENSe:]POWer:AC:REFerence
on page 466
[SENSe:]POWer:AC:REFerence:AUTO
on page 466
7.7.2 Averaging
The basic parameters define how averaging is applied in TRFL measurements.
Averaging .................................................................................................................... 171
Averaging Mode .......................................................................................................... 171
Averaging Count ..........................................................................................................171
Averaging Table ...........................................................................................................171
Averaging
Enables or disables data averaging.
Remote command:
[SENSe:]POWer:AC:AVERage[:STATe]
on page 466
Averaging Mode
Selects the averaging mode.
Remote command:
[SENSe:]POWer:AC:AVERage:AUTO
on page 466
Averaging Count
Defines an averaging count.
Remote command:
[SENSe:]POWer:AC:AVERage:COUNt
on page 467
Averaging Table
Provides functionality to set specific numbers of averages for different level ranges.
Remote command:
[SENSe:]POWer:AC:AVERage:DATA
on page 467
Tuned RF Level Settings