R&S FSMR3000, User Manual

Page: 362 / 733

Network Operation and Remote Control
R&S
®
FSMR3000
362 User Manual 1179.0116.02 ─ 02
SNMP Location
"SNMP Location" defines the SNMP location information. This information complies
with the server's physical location and is used for identification of the SNMP server. By
default, this input field is empty.
Remote command:
SYSTem:COMMunicate:SNMP:LOCation
on page 615
SNMP Contact
"SNMP Contact" defines the SNMP contact information. This information complies with
the person who manages the SNMP server and is used for identification of the SNMP
server. By default, this input field is empty.
Remote command:
SYSTem:COMMunicate:SNMP:CONTact
on page 615
11.6.5.3 Device Tags
Access: [SETUP] > "N Remote" > "HUMS" > "Enhanced Settings" > "Config-
ure" > "Device Tags"
The "Device Tags" tab of the "Enhanced Settings" dialogs displays the defined device
tags. You can also add or delete device tags here.
A device tag is a label to assign to your instrument. You can create any device tag for
your instrument and define it by a specific key and value.
Add ..............................................................................................................................362
Index ........................................................................................................................... 362
Key .............................................................................................................................. 362
Value ........................................................................................................................... 363
Delete All .....................................................................................................................363
Add
Adds a new device tag.
Remote command:
DIAGnostic:HUMS:TAGS[:VALue]
on page 613
Index
Index (ID) of the created device tag. You can change the ID if necessary.
Key
Defines a key for your device tag. A device tag key represents the type of tag.
Network and Remote Control Settings