WCDMA TPC Measurement
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
797
User Manual 1173.9657.02 ─ 11
For parameter descriptions refer to the multi evaluation measurement,
In TPC measurement, the settings are for example used to determine the expected
power step size for the "Change of TFC" limits.
RMC > DL Resource in Use
This parameter is only displayed while the combined signal path scenario is active and
if option R&S CMW-KS410 is available.
For measurement mode "Change of TFC" set 50 % to generate a discontinuous
DPDCH. For all other measurement modes, 100 % is recommended to avoid unde-
sired power steps.
For more details and remote commands, refer to the description of the WCDMA signal-
ing application.
Remote command:
(CSP)
4.3.2.3
Measurement Control Settings
The "Measurement Control" parameters configure the scope of the WCDMA TPC mea-
surement.
Fig. 4-17: WCDMA TPC: measurement control settings in combined signal path scenario
................................................................................................ 798
.................................................................................. 798
.................................................................................... 799
GUI Reference
深圳德标仪器
135-1095-0799