manualshive.com logo in svg

R&S CMW-KG4 Series, User Manual, Page: 86 / 988

Share
Download
R&S CMW-KG4 Series User Manual Download Page 86

WCDMA Signaling

R&S

®

CMW-KG4xx/-KM4xx/-KS4xx

86

User Manual 1173.9657.02 ─ 11

●

DPCCH:

 status of DPCCH.

Three columns present information read out from the first, second and third slot of
the DPCCH subframe.

2.3 Application Sheets

Application sheets describe short application examples for select issues and provide
related background information. The following application sheets are related to the
"WCDMA Signaling" firmware application.

●

Combined Signal Path Measurements

....................................................................86

●

Handover from WCDMA to GSM

............................................................................ 89

●

Inner Loop Power Control Tests

............................................................................. 93

●

Maximum Power Measurements with E-DCH

.........................................................98

●

CS Phase Discontinuity Measurements

................................................................102

2.3.1 Combined Signal Path Measurements

This application sheet describes how to establish a Circuit Switched (CS) connection to
a WCDMA User Equipment (UE) and perform TX measurements on the received
uplink signal.

Sequencer tool R&S CMWrun

The automated test capabilities of R&S CMWrun make many measurement tasks eas-
ier. Option R&S CMW-KT053 provides configurable WCDMA and GSM test modules
and test plans for R&S CMWrun.

2.3.1.1

Options and Equipment Required

A WCDMA combined signal path measurement requires the following equipment:

●

Wideband Radio Communication Tester R&S CMW500 with software version 

≥

V1.0.15.0 or R&S CMW280 with software version 

≥

 V1.0.15.20. The latest software

version is recommended.
This application sheet describes software version V3.2.60.

●

Option R&S CMW-KS400, "WCDMA Signaling" application

●

Option R&S CMW-KM400, "WCDMA TX Measurements"

2.3.1.2

Setting up a Connection

An established connection to the UE is a prerequisite for all signaling tests, including
the combined signal path measurement described in this application sheet.

To set up a connection for the CS domain,

1. Preset your R&S

 

CMW to ensure a definite instrument state.

 

 

 

 

Application Sheets

深圳德标仪器 

135-1095-0799

Summary of Contents for CMW-KG4 Series





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments