WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
230
User Manual 1173.9657.02 ─ 11
Each pattern can be activated for the whole duration of the connection (RAB setup) or
for the duration of a UE report measurement only.
●
FDD
: monitor WCDMA FDD neighbor cells
●
GSM RSSI
: monitor GSM neighbor cells and measure the GSM carrier RSSI
●
GSM initial BSIC
: search for the BSIC and decode it when detecting a new GSM
neighbor cell
●
GSM BSIC reconfirmation
: track and decode the BSIC of a GSM cell after initial
BSIC identification has been performed
●
E-UTRA
: monitor LTE neighbor cells
Remote command:
Single Pattern
Selects a single transmission gap pattern defined in the 3GPP standards.
Each pattern can be activated for the whole duration of the connection (RAB setup) or
for the duration of a UE report measurement only.
●
RF A, RF B, A
: pattern to monitor WCDMA FDD neighbor cells (see 3GPP TS
34.121 tables 5.7.5, 5.7.8 and C.5.2 set 1)
●
B
: pattern to monitor GSM neighbor cells and measure the GSM carrier RSSI (see
3GPP TS 34.121 table C.5.2 set 2)
●
C
: pattern to search for the BSIC and decode it when detecting a new GSM neigh-
bor cell (see 3GPP TS 25.133 table 8.7 pattern 2)
●
D
: pattern to track and decode the BSIC of a GSM cell after an initial BSIC identifi-
cation (see 3GPP TS 25.133 table 8.8 pattern 2)
●
E
: pattern to monitor WCDMA FDD neighbor cells (see 3GPP TS 34.121 table C.
5.1 set 1)
●
F
: pattern to monitor LTE neighbor cells (see 3GPP TS 25.101, table A.22, set 5)
Remote command:
UL CM TX Test Pattern
Selects and activates a special compressed mode patterns according to the conform-
ance test specification 3GPP TS 34.121, section 5.7.
If
= "UL CM TX Test", each pattern is activated via "Execute" button
only once.
●
Type
: compressed mode test patterns specified in standard
–
pattern A (rising TPC) defined in 3GPP TS 34.121, table 5.7.6
–
pattern A (falling TPC) defined in 3GPP TS 34.121, table 5.7.7
–
pattern B defined in 3GPP TS 34.121, table 5.7.8
●
Activation
: triggers the execution of a selected pattern type for the UL com-
pressed mode TX test
Remote command:
GUI Reference
深圳德标仪器
135-1095-0799