WCDMA Multi Evaluation Measurement
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
749
User Manual 1173.9657.02 ─ 11
The values listed below in curly brackets {} are returned for the segments {...}
seg 1
,
{...}
seg 2
, ..., {...}
seg n
.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Return values:
<1_Reliability>
In list mode, a zero reliability indicator indicates that the results
in all measured segments are valid. A non-zero value indicates
that an error occurred in at least one of the measured segments.
{<2_ReturnCode>
Reliability indicator for the segment. The meaning of the
returned values is the same as for the common reliability indica-
tor, see previous parameter.
<3_PCDError>
Peak code domain error
Range:
-100 dB to 0 dB
Default unit: dB
<4_PCDE_Phase>
IPHase | QPHase
Phase where the peak code domain error was measured
IPHase
: I-Signal
QPHase
: Q-Signal
<5_PCDE_CodeNo>} Code number for which the PCDE was measured
Range:
0 to 255
Example:
See
Usage:
Query only
Firmware/Software:
V1.0.15.0
Options:
R&S CMW-KM012
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:CDPower:CURRent?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:CDPower:AVERage?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:CDPower:MINimum?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:CDPower:MAXimum?
FETCh:WCDMa:MEAS<i>:MEValuation:LIST:CDPower:SDEViation?
Return the RMS CDP vs. slot results in list mode.
The values listed below in curly brackets {} are returned for the segments {...}
seg 1
,
{...}
seg 2
, ..., {...}
seg n
.
The number to the left of each result parameter is provided for easy identification of the
parameter position within the result array.
Command Reference
深圳德标仪器
135-1095-0799