WCDMA Signaling
R&S
®
CMW-KG4xx/-KM4xx/-KS4xx
247
User Manual 1173.9657.02 ─ 11
See also: "Statistical Results" in the R&S
CMW user manual, chapter "System Over-
view"
Remote command:
Monitored H-ARQ
Selects either a single H-ARQ process (numbered 0 to 7) to be monitored or specifies
that all processes are to be monitored.
Selecting a single process extends the measurement duration because only a part of
the transmitted subframes is measured. For fast production tests, it is recommended to
monitor all processes.
Remote command:
2.4.24 E-HICH Measurement Configuration
The signaling E-HICH measurement is included in the WCDMA signaling application. It
must be activated in the "Measurement Controller" dialog via the entry "RX Measure-
ment...". The "E-HICH" tab of the RX measurement view and the related configuration
dialog are described in this section.
2.4.24.1
Measurement Control
The measurement is turned on or off using the ON | OFF or RESTART | STOP keys.
See also: "Measurement Control" in the R&S
CMW user manual, chapter "System
Overview"
HSUPA E-HICH (Softkey)
The softkey shows the current measurement state. Additional measurement substates
can be retrieved via remote control.
Remote command:
2.4.24.2
E-HICH Tab
The tab shows the measurement results and the connection status.
GUI Reference
深圳德标仪器
135-1095-0799