75/118
This document and the information contained herein, is the exclusive property of R&M Materials Handling Inc. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials
Handling Inc. Copyright 2020 © R&M Materials Handling Inc. All rights reserved.
7.5.1
Traveling movements
This chapter describes the use of the controls so that you can drive the hoist properly and avoid hazards.
Movements / items
Description
1.
Trolley
movements
Horizontal movements of the
trolley
End stops are fitted to the
runway
of the trolley to limit travel of the
trolley
respectively. Bumpers are fitted to
absorb the impact if the
trolley
runs into the end stops.
NOTICE
Stops and bumpers are intended for the emergency use only. Do not use buffers and
stops as operational means to stop the traveling motion during normal operations.
Manual push trolley
1
Move the trolley by pushing from the load or load hook, not on the chain or pendant
cable. Never move the trolley by pulling on the load, load hook, chain, or pendant
cable.
Never leave the load hanging from the hook unattended.
WARNING
Never PULL on the load or chain. Only move the trolley by PUSHING on the
load hook or load. If you move the load by pulling, you can get trapped for
example, between a wall and the moving load, and get crushed.
