64/118
This document and the information contained herein, is the exclusive property of R&M Materials Handling Inc. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials
Handling Inc. Copyright 2020 © R&M Materials Handling Inc. All rights reserved.
Rotating geared limit switch (option, not available for all models)
If the hoist is equipped with a rotating geared limit switch, the cutting points
(upper and lower limits) of the limit switch need to be adjusted before starting
to operate the hoist.
Checking the operation of the limit switch
First check the operation of the limit switch. For instructions on how to check
the operation of the limit switch, refer to chapter Test run without load.
Adjusting the limit switch
After checking the operation of the limit switch, adjust the upper and lower
limits according to the instructions given in chapter
Limit switch.
If the limit switches cannot be adjusted, the rotating geared limit switch needs
to be replaced.
5
Safety latch
Check to ensure that the hook safety latch is on the hook, it is in good
condition, and closes automatically.
WARNING
Never release the emergency stop button and drive the product until you are
sure that it is safe to do so. Releasing the emergency stop button and driving
the product when it is unsafe to do so could cause death or serious injury.
