41/118
This document and the information contained herein, is the exclusive property of R&M Materials Handling Inc. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials
Handling Inc. Copyright 2020 © R&M Materials Handling Inc. All rights reserved.
5.2
Electrical connections
Only a qualified electrician may make any electrical connections.
The electrical connections must be made according to the wiring diagrams that
are provided with the product.
WARNING
The power supply must be OFF and locked before making any electrical
connections. The lockout-tagout procedures must be followed in accordance
with the local regulations. See chapter Lockout-tagout procedure.
DANGER
GROUNDING:
AN IMPROPER OR INSUFFICIENT GROUND CONNECTION CREATES AN
ELECTRICAL SHOCK HAZARD WHEN TOUCHING ANY PART OF THE HOIST
OR TROLLEY. IN THE POWER SUPPLY CABLE THE GROUND WIRE WILL BE
EITHER GREEN WITH YELLOW STRIPE OR SOLID GREEN. IT SHOULD
ALWAYS BE CONNECTED TO A SUITABLE GROUND CONNECTION. DO NOT
PAINT THE TROLLEY WHEEL RUNNING SURFACES OF THE BEAM AS THIS
CAN AFFECT GROUNDING.
Do not use the equipment before proper commissioning. For commissioning
instructions, see chapter Commissioning.
Note:
There are wires, that were used in the manufacturing, hanging from the connector of the hoist. Remove
the wires later as instructed.