66/118
This document and the information contained herein, is the exclusive property of R&M Materials Handling Inc. and represents a non-public, confidential and proprietary trade
secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials
Handling Inc. Copyright 2020 © R&M Materials Handling Inc. All rights reserved.
Hoist
Two speed pushbutton control
The motor moves at one of two preset speeds corresponding to the force applied to the direction control. The
motor moves at its slowest speed when the control is partially pushed and at its maximum speed when the control
is fully pushed. The motor stops moving when the pushbutton is released.
Trolley
7.4.2
Lifting and Lowering Motions
Before lifting
After securely attaching the load to the lifting device, the hoist must be correctly positioned and attached to perform
the lift. The following steps must be followed before lifting.
WARNING
Moving a load that is not properly attached to the lifting device can result in
death or a serious injury.
Note:
Do not attempt to lift a load which is fastened to the ground or to a base which will prevent it from being
lifted.