RAM Commercial PROMASTER 2022 Page 96 Owner'S Manual Download

Page: 96 / 284

STARTING AND OPERATING

URNING

CTIVE

RIVING

SSIST

Active Driving Assist On/Off Button

To enable the Active Driving Assist system,

proceed as follows:
1. Push the Active Driving Assist on/off button

located on the right side of the steering

wheel. The steering wheel image will display

grey in the instrument cluster display until the

system is engaged. If ACC was previously

turned off, pushing this button will activate

just the lane centering feature of the ADA

system. Push the ACC button to activate both

ACC and ADA Systems.

2. If ACC was active and engaged before pushing

the ADA on/off button, ACC will remain

engaged and ADA will become enabled and

then engaged (once all other conditions are

met).

3. If ACC was not enabled before pushing the

ADA on/off button, push the SET (+) button or

the SET (-) button and release when the

desired driving speed is shown in the

instrument cluster display.

4. If desired, adjust the ACC distance setting by

pushing the Distance Setting button.

When all system conditions are met as described

in “System Engagement Conditions” in the next

section, the system will engage and the steering

wheel image in the display will change to green.

Active Driving Assist Engaged (Steering Wheel Green)

NOTE:

Along with the color change of the steering wheel

image, the “glow” effect of the instrument cluster

display will also change to green when ADA is

engaged.
System Engagement Conditions
The following conditions must be met before the

system will engage:



Active Driving Assist system is enabled



ACC is engaged



System detects visible lane markings



Vehicle is traveling below 93 mph (150 km/h)



Vehicle is centered in lane



Turn signal is not activated



Vehicle is not in a tight curve



Driver has hands on steering wheel

22_VF_OM_EN_USC_t.book Page 94

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands