RAM Commercial PROMASTER 2022 Owner'S Manual Download

Page: 113 / 284

STARTING AND OPERATING

111

NOTE:



Tighten the fuel filler cap until you hear a

“clicking” sound. This is an indication that the

fuel filler cap is properly tightened.



If the gas cap is not tightened properly, the MIL

may come on. Be sure the gas cap is tightened

every time the vehicle is refueled.

OOSE

UEL

ILLER

ESSAGE

If the vehicle diagnostic system determines that

the fuel filler cap is loose, improperly installed, or

damaged, a “Check Fuel Cap” message will be

displayed in the instrument cluster display

page 55. Tighten the fuel filler cap until a

“clicking” sound is heard. This is an indication that

the fuel filler cap is properly tightened.
If the problem continues, the message will appear

the next time the vehicle is started. See an

authorized dealer as soon as possible.

VEHICLE LOADING

As required by National Highway Traffic Safety

Administration regulations, your vehicle has a

certification label affixed to the driver's side door or

B-pillar.
If seats are removed for carrying cargo, do not

exceed the specified GVWR and GAWR.

EHICLE

ERTIFICATION

ABEL

Your vehicle has a Vehicle Certification Label

affixed to the driver’s side B-pillar or the rear of the

driver’s door.
The label contains the following information:



Name of manufacturer



Month and year of manufacture



Gross Vehicle Weight Rating (GVWR)



Gross Axle Weight Rating (GAWR) front and rear



Vehicle Identification Number (VIN)



Type of vehicle



Month, Day, and Hour (MDH) of manufacture

The bar code allows a computer scanner to read

the VIN.

ROSS

EHICLE

EIGHT

ATING

(GVWR)

The GVWR is the total allowable weight of your

vehicle. This includes driver, passengers, and

cargo. The total load must be limited so that you do

not exceed the GVWR.

ROSS

XLE

EIGHT

ATING

(GAWR)

The GAWR is the maximum capacity of the front

and rear axles. Distribute the load over the front

and rear axles evenly. Make sure that you do not

exceed either front or rear GAWR.

CAUTION!



Damage to the fuel system or emissions

control system could result from using an

improper fuel tank filler tube cap.



A poorly fitting fuel filler cap could let impuri

ties into the fuel system.



A poorly fitting fuel filler cap may cause the

Malfunction Indicator Light (MIL) to turn on.



To avoid fuel spillage and overfilling, do not

“top off” the fuel tank after filling. When the

fuel nozzle “clicks” or shuts off, the fuel tank

is full.

WARNING!

Because the front wheels steer the vehicle, it is

important that you do not exceed the maximum

front or rear GAWR. A dangerous driving condition

can result if either rating is exceeded. You could

lose control of the vehicle and have a collision.

22_VF_OM_EN_USC_t.book Page 111

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands