RAM Commercial PROMASTER 2022 Page 156 Owner'S Manual Download

Page: 156 / 284

154

SAFETY

Trailer Merge Assist — If Equipped

Trailer Merge Assist is a function of the Blind Spot

Monitoring (BSM) system that extends the blind

spot zone to work while pulling a trailer.
NOTE:

When Trailer Merge Assist is activated, Rear Cross

Path is disabled.
Trailer Merge Assist consists of three sub

functions:



Automatic Trailer Detection



Trailer Length Detection



Trailer Merge Warning

Blind Spot Zones With Trailer Merge Assist

Automatic Trailer Detection
There are two modes of operation for the detection

of the trailer length:



Automatic Mode

— When “Auto Mode” is

selected, the system will use the blind spot

sensors to automatically determine the pres

ence and length of a trailer. The presence of a

trailer will be detected using the blind spot radar

within 90 seconds of forward movement of the

vehicle. The vehicle must be moving above

6 mph (10 km/h) to activate the feature. Once

the trailer has been detected, the system will

default to the maximum blind spot zone until the

length has been verified. You will see “Auto” in

the instrument panel cluster



Maximum Mode

— When “Max Mode” is

selected, the system will default to the

maximum blind spot zone regardless of what

size trailer is attached

NOTE:

Selected setting is stored when the ignition is

placed in the OFF position. To change this setting,

it must be selected through the Uconnect Settings

page 123.

Trailer Length Detection
Once the trailer presence has been established,

the trailer length will be established (by making a

90 degree turn) and then the trailer length

category (example 10-20 ft (3 m to 6 m)) will be

displayed. This can take up to 30 seconds after

completing the turn.
NOTE:

During the same ignition cycle, if the vehicle is at a

standstill for a minimum of 90 seconds, a new

“trailer detection request” is enabled by the

system once the vehicle resumes motion.
The maximum trailer length supported by the

Trailer Merge Assist feature is 39.5 ft (12 m).

Trailer length is considered the forward most

portion of the trailer hitch to the rearward most

portion of the body, fascia/bumper, or ramp of the

trailer.
The maximum width supported by the Trailer

Merge Assist feature is 8.5 ft (2.59 m). Trailer

width is measured at the widest portion of the

trailer and may include wheels, tires, finders, or

rails.

1 — Vehicle
2 — Trailer

22_VF_OM_EN_USC_t.book Page 154

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands