RAM Commercial PROMASTER 2022 Owner'S Manual Download

Page: 148 / 284

146

SAFETY

LECTRONIC

RAKE

ONTROL

(EBC)

YSTEM

Your vehicle is equipped with an advanced

Electronic Brake Control (EBC) system that

includes the Brake Assist System (BAS), Crosswind

Assist (CWA), Electronic Stability Control (ESC), Hill

Start Assist (HSA), Traction Control System (TCS),

and Trailer Sway Control (TSC). These systems

complement the Anti-Lock Brake System (ABS) by

optimizing the vehicle braking capability during

emergency braking maneuvers.

Brake Assist System (BAS)

The BAS is designed to optimize the vehicle’s

braking capability during emergency braking

maneuvers. The system detects an emergency

braking situation by sensing the rate and amount

of brake application and then applies optimum

pressure to the brakes. This can help reduce

braking distances. The BAS complements the

Anti-Lock Brake System (ABS). Applying the brakes

very quickly results in the best BAS assistance.

To receive the benefit of the system, you must

apply continuous braking pressure during the

stopping sequence (do not “pump” the brakes).

Do not reduce brake pedal pressure unless

braking is no longer desired. Once the brake pedal

is released, the BAS is deactivated.

Crosswind Assist (CWA)

CWA helps keep your vehicle from drifting out of its

lane due to unexpected crosswinds by means of

targeted braking of individual wheels. The system

will provide automatic stability assistance to

counteract the effect of strong side wind. If a

strong lateral wind is detected, front and rear

brakes on the affected side are applied, creating a

steering effect that mitigates the crosswind

influence. During system intervention, the driver

should perceive the natural stable handling feel of

the vehicle.

Crosswind Assist will activate automatically when

the vehicle reaches speeds above approximately

43 mph (70 km/h). When the system is activated,

the ESC Warning Light in the instrument cluster will

blink to warn the driver.

Electronic Stability Control (ESC)

ESC enhances directional control and stability of

the vehicle under various driving conditions.

ESC corrects for over/under steering of the vehicle

by applying the brake of the appropriate wheel(s)

to counteract the above conditions. Engine power

may also be reduced to help the vehicle maintain

the desired path.



Oversteer – when the vehicle is turning more

than appropriate for the steering wheel position.



Understeer – when the vehicle is turning less

than appropriate for the steering wheel position.

WARNING!

The Brake Assist System (BAS) cannot prevent

the natural laws of physics from acting on the

vehicle, nor can it increase the traction afforded

by prevailing road conditions. BAS cannot

prevent collisions, including those resulting from

excessive speed in turns, driving on very slippery

surfaces, or hydroplaning. The capabilities of a

BAS-equipped vehicle must never be exploited in

a reckless or dangerous manner, which could

jeopardize the user's safety or the safety of

others.

22_VF_OM_EN_USC_t.book Page 146

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands