RAM Commercial PROMASTER 2022 Page 48 Owner'S Manual Download

Page: 48 / 284

GETTING TO KNOW YOUR VEHICLE

(Continued)

OWER

UTLETS

Passenger Compartment Power Outlet
The power outlet is located on the instrument

panel to the right of the radio. It only operates with

the ignition in the ON/RUN position.

Passenger Compartment Power Outlet

Load Compartment Power Outlet — If Equipped
The load compartment power outlet is located in

the rear cargo compartment. The outlet can be is

used for powering 12 Volt adapter accessories and

recharging communications devices.

Load Compartment Power Outlet

NOTE:

Do not connect devices with power higher than

180 W to the socket. Do not damage the socket by

using unsuitable adapters.

Power Outlet Fuses — Under Hood

1 — F14 Fuse 20 Amp Yellow Front Power Outlet
2 — F09 Fuse 15 Amp Blue Rear Power Outlet

WARNING!

To avoid serious injury or death:



Only devices designed for use in this type of

outlet should be inserted into any 12 Volt

outlet.



Do not touch with wet hands.



Close the lid when not in use and while driving

the vehicle.



If this outlet is mishandled, it may cause an

electric shock and failure.

CAUTION!



Many accessories that can be plugged in draw

power from the vehicle's battery, even when

not in use (i.e., cellular phones, etc.). Eventu

ally, if plugged in long enough, the vehicle's

battery will discharge sufficiently to degrade

battery life and/or prevent the engine from

starting.



Accessories that draw higher power

(i.e., coolers, vacuum cleaners, lights, etc.)

will degrade the battery even more quickly.

Only use these intermittently and with

greater caution.

22_VF_OM_EN_USC_t.book Page 46

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands