RAM Commercial PROMASTER 2022 Owner'S Manual Download

Page: 182 / 284

180

SAFETY

If the answer to any of these questions was “no,”

then the child still needs to use a booster seat in

this vehicle. If the child is using the lap/shoulder

belt, check seat belt fit periodically and make sure

the seat belt buckle is latched. A child’s squirming

or slouching can move the belt out of position. If

the shoulder belt contacts the face or neck, move

the child closer to the center of the vehicle, or use

a booster seat to position the seat belt on the child

correctly.

Installing Child Restraints In Commercial

Vehicles

This commercial vehicle is not designed for use as

a family vehicle and is not intended for carrying

children in the front passenger seat(s). Never

install rear-facing child restraints in this vehicle.

Although the seat belt can be locked to secure a

child restraint, there are no tether anchorages to

complete the proper installation of a

forward-facing child restraint. If you must carry a

child in a forward-facing child restraint, the

passenger seat should be moved to the full

rearward position and the child must be in a proper

restraint system based on its age, size and weight.

Follow the instructions below to secure the child

restraint using the seat belt.

Installing Child Restraints Using The

Vehicle Seat Belt

Child restraint systems are designed to be secured

in vehicle seats by lap belts or the lap belt portion

of a lap/shoulder belt.

WARNING!

Never allow a child to put the shoulder belt

under an arm or behind their back. In a crash,

the shoulder belt will not protect a child properly,

which may result in serious injury or death.

A child must always wear both the lap and

shoulder portions of the seat belt correctly.

WARNING!

Rear-facing infant restraints must never be

secured in the passenger seat of a vehicle with a

passenger air bag. In a collision, a passenger air

bag may deploy causing severe injury or death to

infants riding in rear-facing infant restraints.

WARNING!



Improper installation or failure to properly

secure a child restraint can lead to failure of

the restraint. The child could be badly injured

or killed.



Follow the child restraint manufacturer’s

directions exactly when installing an infant or

child restraint.

22_VF_OM_EN_USC_t.book Page 180

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands