RAM Commercial PROMASTER 2022 Page 264 Owner'S Manual Download

Page: 264 / 284

262

TECHNICAL SPECIFICATIONS

3.6L E

NGINE

This engine is designed to meet all

emission regulations and provide

optimum fuel economy and performance

when using high quality unleaded regular

gasoline having a posted octane number of 87 as

specified by the (R+M)/2 method. The use of

higher octane premium gasoline is not required, as

it will not provide any benefit over regular gasoline

in these engines.

EFORMULATED

ASOLINE

Many areas of the country require the use of

cleaner-burning gasoline referred to as

“reformulated gasoline”. Reformulated gasoline

contains oxygenates and are specifically blended

to reduce vehicle emissions and improve air

quality.
The use of reformulated gasoline is recommended.

Properly blended reformulated gasoline will

provide improved performance and durability of

engine and fuel system components.

ATERIALS

DDED

UEL

Besides using unleaded gasoline with the proper

octane rating, gasolines that contain detergents,

corrosion and stability additives are

recommended. Using gasolines that have these

additives will help improve fuel economy, reduce

emissions, and maintain vehicle performance.

Designated TOP TIER Detergent

Gasoline contains a higher level of

detergents to further aide in minimizing

engine and fuel system deposits. When

available, the usage of TOP TIER Detergent

gasoline is recommended. Visit

www.toptiergas.com for a list of TOP TIER

Detergent Gasoline retailers.
Indiscriminate use of fuel system cleaning agents

should be avoided. Many of these materials

intended for gum and varnish removal may contain

active solvents or similar ingredients. These can

harm fuel system gasket and diaphragm materials.

ASOLINE

XYGENATE

LENDS

Some fuel suppliers blend unleaded gasoline with

oxygenates such as ethanol.

Problems that result from using gasoline

containing more than 15% ethanol (E-15) or

gasoline containing methanol are not the

responsibility of the manufacturer and may void or

not be covered under New Vehicle Limited

Warranty.

CAUTION!

DO NOT use E-85, gasoline containing methanol,

or gasoline containing more than 15% ethanol

(E-15). Use of these blends may result in starting

and drivability problems, damage critical fuel

system components, cause emissions to exceed

the applicable standard, and/or cause the

Malfunction Indicator Light to illuminate. Please

observe pump labels as they should clearly

communicate if a fuel contains greater than

15% ethanol (E-15).

22_VF_OM_EN_USC_t.book Page 262

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands