RAM Commercial PROMASTER 2022 Page 49 Owner'S Manual Download

Page: 49 / 284

GETTING TO KNOW YOUR VEHICLE

OWER

NVERTER

— I

QUIPPED

There is a 115 Volt, 150 Watt inverter outlet

located on the instrument panel, to the right of the

radio, to convert DC current to AC current. This

outlet can power cellular phones, electronics and

other low power devices requiring power up to

150 Watts. Certain game consoles will exceed this

power limit, as will most power tools.

Power Inverter Location

To turn on the power inverter outlet, simply plug in

the device. The outlet automatically turns off when

the device is unplugged.
The power inverter is designed with built-in

overload protection. If the power rating of

150 Watts is exceeded, the power inverter will

automatically shut down. Once the electrical

device has been removed from the outlet the

inverter should automatically reset. To avoid

overloading the circuit, check the power ratings on

electrical devices prior to using the inverter.

UXILIARY

WITCHES

— I

QUIPPED

Your vehicle may be equipped with two auxiliary

switches located on the instrument panel to the

left of the steering column which can be used to

power various electronic devices. Connections to

the switches are found in the right central pillar

fuse panel at the base of the passenger side

B-pillar.

Auxiliary Switches

Auxiliary Switch 1 is configured to constant battery

feed, while Auxiliary Switch 2 is configured to

ignition feed.
For further information on using the auxiliary

switches, please refer to the Ram Body Builder’s

Guide by accessing

www.rambodybuilder.com

and choosing the appropriate links.



After the use of high power draw accessories,

or long periods of the vehicle not being started

(with accessories still plugged in), the vehicle

must be driven a sufficient length of time to

allow the generator to recharge the vehicle's

battery.

CAUTION!

WARNING!

To avoid serious injury or death:



Do not insert any objects into the receptacles.



Do not touch with wet hands.



Close the lid when not in use.



If this outlet is mishandled, it may cause an

electric shock and failure.

22_VF_OM_EN_USC_t.book Page 47

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands