RAM Commercial PROMASTER 2022 Page 27 Owner'S Manual Download

Page: 27 / 284

GETTING TO KNOW YOUR VEHICLE

(Continued)

Recliner Adjustment

Without Swivel Seat
The recliner knob is on the rear outboard side of

the seat. To recline the seatback, lean back, rotate

the knob rearward to position the seatback as

desired. To return the seatback to its normal

upright position, lean forward, rotate the knob

forward until the seatback is in the upright

position.
With Swivel Seat
The recliner lever is located at the lower front

outboard side of the seat. To recline the seatback,

lean forward slightly, pull the lever outward, lean

back to the desired position and release the lever.

To return the seatback to its normal upright

position, lean forward and pull the lever outward.

Release the lever once the seatback is in the

upright position.

Lumbar Support — If Equipped

This feature allows you to increase or decrease the

amount of lumbar support. The lumbar control

knob is located on the rear upper outboard side of

the driver's seatback. Rotate the control forward to

increase and rearward to decrease the desired

amount of lumbar support.

Suspension Seat — If Equipped

The seat is equipped with a mechanical spring

system and hydraulic shock absorber to ensure

maximum comfort and safety. The system of

springs also effectively absorbs impact from

uneven road surfaces.

Damper Weight Adjustment
Use the weight adjustment knob, located on the

inboard side of the seat, to set the required setting

based on body weight, with settings between 88 lb

(40 kg) and 286 lb (130 kg).

Weight Adjustment Knob

WARNING!



Adjusting a seat while the vehicle is moving is

dangerous. The sudden movement of the seat

could cause you to lose control. The seat belt

might not be adjusted properly and you could

be injured. Adjust the seat only while the

vehicle is parked.



Do not ride with the seatback reclined so that

the shoulder belt is no longer resting against

your chest. In a collision, you could slide under

the seat belt and be seriously or even fatally

injured. Use the recliner only when the vehicle

is parked.

WARNING!

22_VF_OM_EN_USC_t.book Page 25

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands