RAM Commercial PROMASTER 2022 Page 99 Owner'S Manual Download

Page: 99 / 284

STARTING AND OPERATING

The Active Driving Assist system DOES NOT:



Warn or prevent collisions with other vehicles



Steer your vehicle around stopped vehicles,

slower vehicles, construction equipment,

pedestrians, or animals



Respond to traffic lights or stop signs



Merge onto highways or exit off ramps



Turn your vehicle



Change lanes



React to cross traffic

The Active Driving Assist system may have limited

or reduced functionality when one of the following

conditions occur:



The vehicle’s radar sensors and/or forward

facing camera is damaged, covered, or

obstructed (e.g. by mud, ice, snow, etc.)



Driving near highway toll booths

NOTE:

If damage to the windshield occurs, have the wind

shield replaced by an authorized dealer as soon as

possible.

PARKSENSE FRONT/REAR PARK ASSIST —

IF EQUIPPED

The ParkSense Park Assist system provides visual

and audible indications of the distance between

the rear, and if equipped, the front fascia/bumper

and a detected obstacle when backing up or

moving forward (e.g. during a parking maneuver).

For limitations of the system (e.g. during a parking

maneuver), see

page 103.

NOTE:



The system is designed to assist the driver and

not to substitute the driver.



The driver must stay in full control of the

vehicle's acceleration and braking and is

responsible for controlling the vehicle's move

ments.

ParkSense will retain the last system state

(enabled or disabled) from the last ignition cycle

when the ignition is placed in the ON/RUN position.



Maintain a safe distance from other vehicles

and pay attention to traffic conditions.



Do not place any objects on the steering wheel

(e.g. steering wheel covers) which could inter

fere with the hand detection sensors.

WARNING!

22_VF_OM_EN_USC_t.book Page 97

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands