RAM Commercial PROMASTER 2022 Page 195 Owner'S Manual Download

Page: 195 / 284

IN CASE OF EMERGENCY

193

(Continued)

2. Rotate the wheel wrench handle counter

clockwise until the spare tire is on the ground

with enough cable slack to allow you to pull it

out from under the vehicle.

Lowering Spare Tire

3. Pull the spare tire out from under the vehicle to

gain access to the spare tire retainer.

Spare Tire

4. Lift the spare tire with one hand to give

clearance to tilt the retainer at the end of the

cable.

Lifting Spare Tire

5. Pull the retainer through the center of the

wheel.

Retainer

ACKING

NSTRUCTIONS

CAUTION!

The winch mechanism is designed for use with

the jack wrench extension tool only. Use of air

wrench or power tool may damage the winch.

WARNING!

Carefully follow these tire changing warnings to

help prevent personal injury or damage to your

vehicle:



Always park on a firm, level surface as far from

the edge of the roadway as possible before

raising the vehicle.



Turn on the Hazard Warning Flashers.

22_VF_OM_EN_USC_t.book Page 193

Summary of Contents for PROMASTER 2022





























































































































































































































































































Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands

RAM Commercial PROMASTER 2022, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2022

Reviews:

Related manuals for PROMASTER 2022

Brands by name

Popular brands