Raisecom
ISCOM2600G-HI (A) Series Configuration Guide
1 Basic configurations
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
16
Step
Command
Description
8
Raisecom(config)#ssh2
server port
port-
number
(Optional) configure SSHv2 snooping port
number.
By default, it is 22.
When configuring SSHv2 snooping port
number, the entered parameter cannot take
effect until SSH is restarted.
9
Raisecom(config)#ssh2
server max-session
session-number
(Optional) configure the maximum number of
SSHv2 sessions.
10
Raisecom(config)#ssh2
access-list {
ip
access-list number
|
ipv6 access-list
number
}
(Optional) configure the ACL number.
11
Raisecom(config)#ssh2
server rekey-interval
value
(Optional) configure the SSH renegotiation time.
12
Raisecom(config)#
ssh2 server close
session
session-
number
(Optional) close the specified SSHv2 session.
1.2.5 Managing users
When you start the ISCOM2600G-HI series switch for the first time, connect the PC through
Console interface to the ISCOM2600G-HI series switch, enter the initial user name and
password in HyperTerminal to log in and configure the ISCOM2600G-HI series switch.
By default, both the user name and password are raisecom.
If there is no privilege restriction, any remote user can log in to the ISCOM2600G-HI series
switch through Telnet or access network by establishing a PPP (Point to Point Protocol)
connection when service interfaces are configured with IP address. This is unsafe to the
ISCOM2600G-HI series switch and network. Creating user for the ISCOM2600G-HI series
switch and configuring password and privilege help manage login users and ensures network
and device security.
Default configurations of user management are as below.
Function
Default value
Local user information
User name: raisecom
Password: raisecom
Privilege: 15
New user privilege
15
