manualshive.com logo in svg

Raisecom ISCOM2600G-HI (A) Series, Configuration Manual

The Raisecom ISCOM2600G-HI (A) Series is a cutting-edge networking device that offers high-speed connectivity and advanced features. To configure this product and unleash its full potential, you can easily access the free Configuration Manual. Download it now from manualshive.com and get started with optimum performance and customized settings.

Share
Download
background image

Raisecom 
ISCOM2600G-HI (A) Series Configuration Guide 

2 Ethernet 

 

 

Raisecom Proprietary and Confidential 

Copyright © Raisecom Technology Co., Ltd. 

136 

 

Port      ProfileID    BpduType    mac-address      l2cp-process  
-------------------------------------------------------------------------
----- 
GE1/1/1   1            stp         0180.C200.0000   tunnel       
                       dot1x       0180.C200.0003   drop         
                       lacp        0180.C200.0002   drop         
                       oam         0180.C200.0002   drop         
                       cdp         0100.0CCC.CCCC   drop         
                       vtp         0100.0CCC.CCCC   drop         
                       pvst        0100.0CCC.CCCD   drop         
                       lldp        0180.C200.000E   drop         
                       elmi        0180.C200.0007   drop         
                       udld        0100.0CCC.CCCC   drop         
                       pagp        0100.0CCC.CCCC   drop         
GE1/1/2   2            stp         0180.C200.0000   tunnel       
                       dot1x       0180.C200.0003   drop         
                       lacp        0180.C200.0002   drop         
                       oam         0180.C200.0002   drop         
                       cdp         0100.0CCC.CCCC   drop         
                       vtp         0100.0CCC.CCCC   tunnel       
                       pvst        0100.0CCC.CCCD   drop         
                       lldp        0180.C200.000E   drop         
                       elmi        0180.C200.0007   peer         
                       udld        0100.0CCC.CCCC   drop         
                       pagp        0100.0CCC.CCCC   drop         
GE1/1/3   --           --          --               --           
GE1/1/4   --           --          --               --           
GE1/1/5   --           --          --               --      
… 

 

2.13 Voice VLAN 

2.13.1 Introduction 

With increasing growth of voice technologies, voice devices are more and more widely used, 
especially in broadband residential communities. The network usually transmits voice traffic 
and data traffic concurrently, but voice traffic requires a higher priority than data traffic in 
transmission to avoid delay and packet loss. 

A voice VLAN is especially partitioned for voice traffic of users. By partitioning voice 
VLANs and add interfaces of the voice device to voice VLANs, you can configure QoS of 
voice traffic to increase the priority of transmitting voice traffic and guarantee call quality. 

Compared with other methods for managing voice traffic, the voice VLAN has the following 
advantages: 

 

Easy configuration: after you configure the voice device in global configuration mode 
and interface configuration mode and enable the voice VLAN, the voice device can 
classify and process voice traffic. 

 

Easy maintenance: you can modify rules (voice VLAN OUI address) for matching voice 
traffic in global configuration mode. When a new IP voice device joins the network, its 
interfaces can rapidly identify voice traffic by updated matching rules. 

Summary of Contents for ISCOM2600G-HI (A) Series






































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for ISCOM2600G-HI (A) Series

D-Link TM DES-6500 Command Line Interface Reference Manual preview
TM DES-6500
Brand: D-Link Pages: 267
H3C S3100 Series Command Manual preview
S3100 Series
Brand: H3C Pages: 1089
E-Trailer E-Switch Product Manual preview
E-Switch
Brand: E-Trailer Pages: 8
Balluff BNI IOL-727-S51-P012 Assembly Instructions Manual preview
BNI IOL-727-S51-P012
Brand: Balluff Pages: 20
tbs electronics RBS Series Manual preview
RBS Series
Brand: tbs electronics Pages: 2
steute 1177987 Mounting And Wiring Instructions preview
1177987
Brand: steute Pages: 20
Greengate VNLW-P-1001-MV-N-V Installation Instructions preview
VNLW-P-1001-MV-N-V
Brand: Greengate Pages: 2
Key Digital HD Flash 4 KD-SW4x1 Operating Instructions Manual preview
HD Flash 4 KD-SW4x1
Brand: Key Digital Pages: 12
Magnum M9-EKCS Quick Start Manual preview
M9-EKCS
Brand: Magnum Pages: 3
Cabletron Systems Cyber SWITCH 1000 User Manual preview
Cyber SWITCH 1000
Brand: Cabletron Systems Pages: 106
Accton Technology EH3008D Quick Installation Manual preview
EH3008D
Brand: Accton Technology Pages: 7
LEGRAND HKRL20 Installation Manual preview
HKRL20
Brand: LEGRAND Pages: 30
Contec SH-9008AT-POE Reference Manual preview
SH-9008AT-POE
Brand: Contec Pages: 38
Lantech IPGS-5 Series User Manual preview
IPGS-5 Series
Brand: Lantech Pages: 29
TRENDnet TE100-DS24 Specifications preview
TE100-DS24
Brand: TRENDnet Pages: 2
AMX AVS-OCT-4832-117 Product View preview
AVS-OCT-4832-117
Brand: AMX Pages: 1
Black Box SW485A User Manual preview
SW485A
Brand: Black Box Pages: 50
CrimeStopper SECURVIEW SV-7020 Installation Diagram preview
SECURVIEW SV-7020
Brand: CrimeStopper Pages: 1

Brands by name

Popular brands

Load more brands