Rain Master RME EAGLE, User Manual

Page: 52 / 168

Rain Master Irrigation Systems RME EAGLE User Manual
Chapter 5 Function and Execution Key Operations Page 45
5.5 QUICK STATIONS FUNCTION KEY
Usage:
This key is used to program a block of stations, all with the same runtime. Use the
PROGRAM key to select the irrigation program to be used, then press the QUICK
STATIONS key; the display will prompt for the lowest station (LO) number of the
block, using the DATA ENTRY KEYS enter a value between 1 – 36 (based on
station configuration of the controller), then press ENTER.
The display will prompt for the highest station (HI) number of the block, using the
DATA ENTRY KEYS enter a value between 1 – 36 (based on station configuration
of the controller), then press ENTER.
The display will prompt for the runtime length (LN) of all selected stations, using the
DATA ENTRY KEYS, enter a value between 0 – 9:59 (0 to 9 hours 59 minutes),
then press ENTER to complete the
action. The controller returns to the Automatic
Mode.
If you wish to terminate the Quick Stations programming entry at any point, press
the QUIT key to return to the Automatic Mode.
5.5.1 Conventional Quick Station Programming
This feature is used to rapidly program a block of stations, which will all have the same runtime.
After selecting the QUICK STATIONS function, the controller will briefly display the Global
Percentage Value, the controller will first prompt for the lowest station number, then the highest
station number and lastly for the station runtime. This runtime length (Watering Time) is applied to
all the stations within the block, from the lowest through the highest. Selected stations are shown in
the STATIONS/DAYS display. As a convenience, the Program Number is shown in the
PROMPT/MESSAGE display, during station entry.
EXAMPLE: Program Stations12 through Station 34 for a runtime of 56 minutes.
Press:
The controller returns to the Automatic Mode.
QUICK
STATIONS
QUICK
STATIONS
1
SUN
ENTER
3
TUE
ENTER
5
THU
ENTER
6
FRI
2
MON
4
WED