RME EAGLE User Manual
Rain Master Irrigation Systems
Page 64
Chapter 6 Setup Key Operations
EXAMPLE:
To select a Normally Open Master Valve,
Continue to Press:
Until display indicates:
Press:
The 1 key acts as a toggle key when used in this SETUP
configuration
item.
Display will indicate:
Press:
The controller will return to the Automatic Mode.
6.4 PUMP
The Pump feature allows you to program a Pump to be activated when program 1, 2, 3, or 4 is
activated. The controller uses Station 1 as the pump output. Use this feature only if the Pump is to
be connected to Station 1. If the pump is to be connected to the Master Valve output, then use the
Master Valve configuration feature.
NOTE:
Refer to wiring diagrams and explanations in the MASTER VALVE and
PUMP WIRING OPTIONS section before configuring this option.
A typical example for using this feature occurs when using a Normally Open Master Valve and
Pump combination.
NOTE:
If you select a Pump for any program, the controller will not allow you to
include a Station 1 runtime in any program. If you have already
programmed Station 1 into a program the controller will automatically
remove it.
EXAMPLE:
Configure a Pump to turn on when Programs 2 and 4 are running,
Continue to Press:
Until display indicates:
SETUP
TYPE-NC
PROGRAM
1
SUN
ENTER
QUIT
SETUP
PUMP
PROGRAM
TYPE-NO
PROGRAM
Summary of Contents for RME EAGLE
Page 1: ......
Page 7: ...RME EAGLE User Manual Rain Master Irrigation Systems Page vi Table of Contents NOTES...
Page 168: ......
