Rain Master Irrigation Systems
RME EAGLE User Manual
Chapter 5 Function and Execution Key Operations
Page 49
5.7 MANUALLY ACTIVATED FUNCTIONS
Usage:
The MANUAL key is used to manually execute a previously stored irrigation
program, start a selected station, activate the Master Valve, or run the System
Check/Syringe Check. The RME EAGLE controller provides these four features in
the Manual Mode of operation.
Press the MANUAL key; the controller will display a prompt to select either a
program or a station.
To select a program press the PROGRAM key; press DATA ENTRY keys 1 – 4 to
select the irrigation program number, then press ENTER to complete the
action.
To select a station press the STATION key; press DATA ENTRY keys 1 – 36
(depending on station configuration) to select the station number, then press ENTER.
The controller will prompt for the station runtime, enter a value between 0 – 959 (0 –
9 hours 59 minutes), then press ENTER to complete the
action. The controller will
turn on the selected station.
To activate the Master Valve press the STATION key; press key 0 to select the
Master Valve, then press ENTER to complete the
action.
To select the System Check/Syringe Cycle, Press the MANUAL key; press DATA
ENTRY keys 1 – 9 to set the runtime of the System Check/Syringe Cycle. DO NOT
press the ENTER key.
If you wish to terminate the Manual process at any point, press the QUIT key to
return to the Automatic Mode.
5.7.1 MANUAL Program
Manual Program mode is used to run a previously defined program and assumes that stations have
been defined in the program.
EXAMPLE:
Manually run Program 1,
Press:
MANUAL
PROGRAM
ENTER
1
SUN
MANUAL
Summary of Contents for RME EAGLE
Page 1: ......
Page 7: ...RME EAGLE User Manual Rain Master Irrigation Systems Page vi Table of Contents NOTES...
Page 168: ......
