Rain Master RME EAGLE, User Manual

Page: 89 / 168

RME EAGLE User Manual Rain Master Irrigation Systems
Page 82 Chapter 6 Setup Key Operations
Press:
The controller will now LEARN and set up all the upper station flow limits. It will take the Flow
Delay time for each station. If you have a 36 station controller and your Flow Delay time is 2
minutes, it will take 72 minutes. (If you want the controller to skip to the next station at any time,
press MANUAL and the station which was skipped will not have its limit changed). During this
time the LED will display which station is watering and the flow in GPM will be on the display.
When the controller is done, the display will indicate:
Press:
NOTE: While each station is watering, if you have selected a Normally Closed
Master Valve, the Master Valve will come on also; if the station is in a
program that has a Pump assigned to it, the Pump (Station 1) will also turn
on with the station.
NOTE: If you selected Pump for any program, Station 1 will be used for the Pump
and the controller will not set an upper flow limit for Station 1.
6.13.7.2 Setting Station Limits
This feature allows you to directly set a station's upper flow limit to any value. It is an alternative to
using the LEARN mode described above. In this feature each station limit is set one at a time.
To use this feature:
1. Successively press SETUP until you see LIMITS in the display.
2.
Press the station number followed by ENTER.
3. You now have the opportunity to set the upper flow limit in one of two ways. Pressing the
MANUAL key will toggle between them.
ENTER
L I M I T S
PROGRAM
ENTER