RME EAGLE User Manual
Rain Master Irrigation Systems
Page 34
Chapter 5 Function and Execution Key Operations
5.0 FUNCTION AND EXECUTION KEY OPERATIONS
The RME EAGLE controller is capable of running conventional irrigation programs, as well as
sophisticated Evapotranspiration (ET) based irrigation programs. The RME EAGLE controller
utilizes inputs provided by weather sensors; Internet provided adjustment factors, and Historical
trend data that were derived from years of weather data collection and analysis.
In this section of the manual we will explore the use of the RME EAGLE in the roll of a
conventional irrigation controller. Conventional irrigation is programs that have been entered by
you. They do not change or adjust automatically due to changes in the weather conditions. The
RME EAGLE controller will store and execute these entered programs without fail for as long as
you may wish.
In Chapter 6.0 - SETUP Key Operations of the manual we will expand the knowledge and
experience gained here to utilize additional features of the RME EAGLE Controller, including the
use of water measurement sensors and irrigation control methods.
In Chapter 7.0 - ET Key Operations and Chapter 8.0 - ET Programming of this manual we will
explore the features of Evapotranspiration program control. Your RME EAGLE Controller is
capable of interfacing to weather sensors and will automatically adjust watering cycles due to hot
and windy days and changes in the seasons (from Summer to Fall to Winter). Theses Chapters will
cover water conservation methods using the state-of-the-art technology of your RME EAGLE
Controller.
5.1 PROGRAM FUNCTION KEY
Usage:
The PROGRAM key is used to select the program you want to enter, modify or
review. Once selected, you need not change the Program Number until you want to
enter or review information in a different program. The RME EAGLE Controller
has four (4) programs available for your use. They are referred to as 1, 2, 3, and 4.
You may clear all information in a program using this function. To select a program
press the PROGRAM key; press keys 1 – 4 for the program number, then press
ENTER to complete the
selection.
While programming other functions of the controller, the selected program number
is displayed as a convenience.
EXAMPLE:
Select Program Number 2.
Press:
PROGRAM
2
MON
PROGRAM
ENTER
Summary of Contents for RME EAGLE
Page 1: ......
Page 7: ...RME EAGLE User Manual Rain Master Irrigation Systems Page vi Table of Contents NOTES...
Page 168: ......
