UltraRAE 3000 User’s Guide
27.3.2 Determining The Lamp Type
The monitor can accommodate three lamp values: 10.6eV (standard),
9.8eV, and 11.7eV. The monitor automatically reads a marking on the
side of the lamp to set the proper Correction Factor. There are two
ways to determine the lamp type:
Remove the lamp and look for markings (bars) on the side:
•
No bars: 10.6eV
•
1 bar: 11.7eV
•
2 bars: 9.8eV
Also, when the monitor is running, the lamp type is shown along with
the calibration and measurement gas and Correction Factor:
Note:
This screen can be accessed from the reading screen by
pressing [N/-] four times.
109
Summary of Contents for UltraRAE 3000
