UltraRAE 3000 User’s Guide
Once you enter Programming Mode, the LCD displays the first menu,
Calibration. Each subsequent menu is accessed by pressing [N/-]
repeatedly until the desired menu is displayed. To enter a sub-menu
of a menu, press [Y/+].
22.1 Exiting Programming Mode
To exit Programming Mode and return to normal operation, press
[MODE]
once at any of the programming menu displays. You will
see “Updating Settings…” as changes are registered and the mode
changes.
22.2 Navigating Programming Mode Menus
Navigating through the Programming Mode menus is easy and
consistent, using a single interface format of “Select,” “Back” and
“Next” at the top level. The three control buttons correspond to these
choices as shown:
Note:
Pressing [MODE] in the Programming Mode’s top level causes
the instrument to exit Programming Mode and return to monitoring.
The three keys perform the following functions in Programming Mode:
Key
Function in Programming Mode
[MODE]:
Exit menu when pressed momentarily or exit
data entry mode
[Y/+]:
Increase alphanumerical value for data entry or
confirm (yes) for a question
[N/-]:
Provides a “no” response to a question
63
Summary of Contents for UltraRAE 3000
