Rae UltraRAE 3000, User Manual

Page: 16 / 129

UltraRAE 3000 User’s Guide
5 Replacing Alkaline Batteries
An alkaline battery adapter is supplied with each instrument. The
adapter (part number 059-3052-000) accepts four AA alkaline
batteries
(use only Duracell MN1500) and provides approximately 12
hours of operation. (An optional rechargeable lithium-ion battery
pack, part number 059-3051-000, is also available.)
To install the adapter in the instrument:
1. Remove the alkaline battery adapter from the instrument by
sliding the tab and tilting out the adapter.
2. Replace the batteries (follow the procedure below).
3. Tilt the alkaline battery adapter and put it into the instrument.
4. Slide the tab back into place to secure the battery adapter.
To insert batteries into the adapter:
1. Remove the three hex-socket screws to open the compartment
in the adapter.
14