UltraRAE 3000 User’s Guide
Repeat this process until all numbers are entered.
When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the opportunity
to register the new settings or to change your mind and revert to your
previous settings.
•
Press [Y/+] to save the changes.
•
Press [N/-] to undo the changes and revert to the previous
settings.
22.6.3 Data Selection
Data Selection allows you to select which types of data are stored and
made available when you offload your datalog to a computer via
ProRAE Studio software.
You can choose any or all of three types of data (you must choose at
least one):
•
Average
•
Maximum
•
Minimum
1.
Press [N/-] to step from one option to the next. The highlighter
indicates your choice.
2.
Press [Y/+] to toggle your selection on or off (the check box
indicates “on” with an “X”).
3.
When you have completed your selections, press [MODE].
You will see two choices: Save and Undo. You have the opportunity
to register the new settings or to change your mind and revert to your
previous settings.
•
Press [Y/+] to save the changes.
•
Press [N/-] to undo the changes and revert to the previous
settings.
75
Summary of Contents for UltraRAE 3000
